M240 Flamethrower Build Guide
Welcome to the M240 Flamethrower build documentation. This guide contains comprehensive assembly instructions for building the M240 Incinerator Unit from Aliens.
Table of Contents
Assembly Guide
- Assembly M240 - Complete M240 assembly instructions with exploded views
Build Overview
The M240 Flamethrower is a prop replica of the iconic incinerator unit used in the film Aliens. This build features custom 3D printed components with copper pipe integration for an authentic look.
Parts Required
Hardware
- M3 x 15mm screws - 8 pieces (round head)
- M3 x 8mm screws - 5 pieces (round head)
- M3 x 8mm screws - 2 pieces (countersunk)
- M3 x 4mm screws - 3 pieces
- M3 x 20mm screws - 1 piece
- Small pen spring - 1 piece (for trigger)
Copper Pipe (12.7mm / 1/2 inch diameter)
- 390mm length - 1 piece
- 321mm length - 1 piece
Getting Started
- Review the Assembly M240 guide for complete build instructions
- Gather all required hardware and copper pipe lengths
- Follow the exploded view diagrams for proper component placement
- Install the trigger spring mechanism
- Secure all assemblies with appropriate screws
Key Features
- Front assembly with copper pipe integration
- Rear housing with Hansen coupler
- Left and right trigger housing assemblies
- Detailed exploded views for assembly guidance
Additional Resources
All assembly images are located in the images/ folder within this directory.
Last Updated: November 2024