M41A Static Counter — DIP Switches
Source file: ./assets/M41A-DIP.pdf
M41A Static counter DIP switches Hardcoded to display 00 when there is no magazine inserted. The Display comes pre -set at 95 when the microswitch is pressed in by the magazine. Carefully slide the DIP switch to the ON (1) position with a small flat screwdriver to match the table below to set the number you wish to display.
Decimal → DIP switch positions
| Decimal | DIP Switch (1..8) |
|---|---|
| 0 | 1 1 1 1 1 1 0 0 |
| 1 | 0 1 1 0 0 0 0 0 |
| 2 | 1 1 0 1 1 0 1 0 |
| 3 | 1 1 1 1 0 0 1 0 |
| 4 | 0 1 1 0 0 1 1 0 |
| 5 | 1 0 1 1 0 1 1 0 |
| 6 | 0 0 1 1 1 1 1 0 |
| 7 | 1 1 1 0 0 0 0 0 |
| 8 | 1 1 1 1 1 1 1 0 |
| 9 | 1 1 1 0 0 1 1 0 |